R&S ESCI Receiver – MEAS Key
1166.6004.12 4.19 E-2
CISPR
AVERAGE
The CISPR AVERAGE softkey activates the weighting average
detector according to CISPR 16-1. The IF bandwidth is
automatically set to the required value according to the receiving
frequency. This coupling can be cancelled by the QP RBW
UNCOUPLED softkey.
IEC/IEEE-bus command: DET:REC CAV
RMS
The RMS softkey activates the rms detector.
IEC/IEEE-bus command DET:REC RMS
QP RBW
UNCOUPLED
The QP RBW UNCOUPLED softkey cancels the coupling of the
IF bandwidth to the frequency range with activated quasi peak or
CISPR average detector.
IEC/IEEE-bus command BAND:AUTO OFF
To Next Page
Loading...
