Rohde & Schwarz EMI Test ReceiverESCI - Page 174

MEAS Key - Receiver R&S ESCI
1166.6004.12 4.42 E-2
Suggested configuration of cables EZ-14/EZ-5/EZ-6/EZ-21
Receiver
EZ-14
EZ-21 for ENV 4200
EZ-5 for ESH2-Z5
EZ-6 for ESH3-Z5
Filter configuration
1
2
3
4
5
6
8
24
1
5
3
4
2
9
9-pin.
socket
018.6430.00
or
0203840.00
supplied with
EZ-5/EZ-6/EZ-2
9-pin.
socket
0531.9304
supplied with
EZ--14
Shielding panel
Fig. 4-6 Assignment of connection cables EZ-5, -6, -14 and –21 with AF filters for feeding the 5-V
supply and the control information for the V-networks R&S ESH2-Z5, R&S ESH3-Z5 and
R&S ENV4200 into a shielded room.
Note: When the R&S ESCI is used inside the shielded room, the filter configuration is omitted.
The cable EZ-14 is then used for controlling the R&S ESH3-Z5, the cable EZ-13 for
controlling the R&S ESH2-Z5, and the cable EZ-21 for controlling the R&S ENV4200.