Example - Level and Frequency Measurement R&S ESCI
1166.6004.12 2.16 E-2
PRINT
SCREEN
! Press the PRINT SCREEN softkey.
The output is started. A window is displayed where
the file name and the path must be entered using
the built-in auxiliary line editor or the external
keyboard, eg
A:\ display.wmf.
! Press the ENTER key.
The screen content is stored on the floppy under the
specified file name.
During storing the softkeys are blanked. Operation
in the menus can be continued when the softkeys
are displayed again.
The file can be used in other Windows applications,
ie it can be linked.
Fig. 2-7 gives an example of a stored display. In the
example, two limit lines are active and four markers
positioned in the spectrum.
Fig. 2-7 Result display stored in a file in WMF format
Note: A detailed description of the file management for complete receiver setups, data records for
traces (traces 1-3), limit lines and transducer is given in in Chapter 4, Section
"Management of Data Files".
limit
lines
marker
marker info
To Next Page
Loading...
