Setting Parameters R&S ESCI
1166.6004.12 3.24 E-1
Correcting the entry
(Version 2)
Terminating the entry
(Version 1)
Terminating the entry
(Version2)
Interrupting the entry
! Position the cursor to the editing line by means of the cursor key
.
! Position the cursor after the character to be deleted by means of
the cursor keys
and or with the spinwheel.
! Press the BACK key.
The entry to the left of the cursor will be deleted.
! Select the EXIT field using the spinwheel and press the spinwheel.
The data entry window will be closed; the new entry will be
accepted by the instrument.
! Move the cursor to the editing line using the cursor key
.
! Press one of the unit keys or the spinwheel.
The data entry window will be closed; the new entry will be
accepted by the instrument.
! Press the ESC key.
The data entry window will be closed; the previous entry will be
retained.
To Next Page
Loading...
