RuggedCom RSG2488 User Manual

Chapter 3
Device Management
RUGGEDCOM RSG2488
User Guide
88 Adding an RMON Event
1
Figure 56: RMON Events Table
1. InsertRecord
2. Click InsertRecord. The RMON Events form appears.
67
8
5
4
3
2
1
9
Figure 57: RMON Events Form
1. Index Box 2. Type List 3. Community Box 4. Last Time Sent Box 5. Description Box 6. Owner Box 7. Apply Button
8. Delete Button 9. View Button 10. Reload Button
3. Configure the following parameter(s) as required:
Parameter Description
Index Synopsis: 1 to 65535
Default: 1
The index of this RMON Event record.
Type Synopsis: { none, log, snmpTrap, logAndTrap }
Default: logAndTrap
The type of notification that the probe will make about this event. In the case of 'log',
an entry is made in the RMON Log table for each event. In the case of snmp_trap, and
SNMP trap is sent to one or more management stations.
Type Synopsis: Any 31 characters
Default: public
If the SNMP trap is to be sent, it will be sent to the SNMP community specified by this
string.
Type Synopsis: DDDD days, HH:MM:SS
The time from last reboot at the time this event entry last generated an event. If this
entry has not generated any events, this value will be 0.

RuggedCom RSG2488 Specifications

General

Brand	RuggedCom
Model	RSG2488
Category	Switch
Language	English