RuggedCom RSG2488 User Manual

RUGGEDCOM RSG2488
User Guide
Chapter 2
Using ROS
Logging In 27
For more information about logging in to the device, refer to Section 2.2, “Logging In”. For more information
about the Web interface, refer to Section 2.4, “Using the Web Interface”.
Using a Terminal or Terminal Emulation Software
A terminal or computer running terminal emulation software provides secure access to the console interface for
ROS through a Telnet, RSH (Remote Shell) or SSH (Secure Shell) service.
NOTE
IP services can be restricted to control access to the device. For more information, refer to
Section 3.10, “Configuring IP Services”.
To establish a connection through a terminal or terminal emulation software, do the following:
1. Select the service (i.e. Telnet, RSH or SSH).
2. Enter the IP address for the device.
3. Connect to the device. Once the connection is established, the login form appears. For more information
about logging in to the device, refer to Section 2.2, “Logging In”.
Section 2.2
Logging In
To log in to the device, do the following:
1. Connect to the device either directly or through a Web browser. For more information about how to connect
to the device, refer to Section 2.1, “Connecting to ROS”.
Once the connection is established, the login form appears.
1
2
Figure 2: SSH Login Screen (Console Interface)
1. User Name Box 2. Password Box
3
2
1
Figure 3: Login Screen (Web Interface)
1. Enter User Name Box 2. Enter Password Box 3. Login Button
NOTE
The following default usernames and passwords are set on the device for each user type:

RuggedCom RSG2488 Specifications

General

Brand	RuggedCom
Model	RSG2488
Category	Switch
Language	English