RuggedCom RSG2488 User Manual

RUGGEDCOM RSG2488
User Guide
Chapter 1
Introduction
Removable Memory 23
Section 1.8
Removable Memory
The RSG2488 features a user-accessible microSD memory slot that supports a standard ISO/IEC 9293-
compatible FAT (File Allocation Table) or FAT 32 file system on a microSD or microSDHC Flash card up to a
capacity of 4GB.
3
1
2
4
Figure 1: microSD Card Slot
1. Cover 2. Screws 3. microSD Flash Card 4. Card Slot
The primary purpose of the microSD card is to regain access to the device in the case of data corruption in the
internal Flash memory. If a version of the firmware (main.bin) exists on the card, ROS will load the firmware
from the microSD card.

RuggedCom RSG2488 Specifications

General

Brand	RuggedCom
Model	RSG2488
Category	Switch
Language	English