RUGGEDCOM RSG2488
User Guide
Chapter 3
Device Management
Deleting an RMON History Control 81
Parameter Description
The maximum number of buckets requested for this RMON collection history group of
statistics. The range is 1 to 4000. The default is 50.
Granted Buckets Synopsis: 0 to 65535
The number of buckets granted for this RMON collection history. This field is not
editable.
Interval Synopsis: 1 to 3600
Default: 1800
The number of seconds in over which the data is sampled for each bucket. The range is
1 to 3600. The default is 1800.
Owner Synopsis: Any 127 characters
Default: Monitor
The owner of this record. It is suggested to start this string withword 'monitor'.
4. Click Apply.
Section 3.11.1.3
Deleting an RMON History Control
To delete an RMON history control, do the following:
1. Navigate to Ethernet Stats > Configure RMON History Controls. The RMON History Controls table appears.
Figure 47: RMON History Controls Table
2. Select the history control from the table. The RMON History Controls form appears.
To Next Page
Loading...
Need help?
General
