RuggedCom RSG2488 User Manual

RUGGEDCOM RSG2488
User Guide
Chapter 5
Setup and Configuration
Managing SNMP Groups 169
64
5
3
2
1
Figure 128: SNMP Security to Group Maps Form
1. Security Model Box 2. Name Box 3. Group Box 4. Apply Button 5. Delete Button 6. Reload Button
3. Click Delete.
Section 5.6.3
Managing SNMP Groups
Multiple SNMP groups (up to a maximum of 32) can be configured to have access to SNMP.
The following sections describe how to configure and manage SNMP groups on the device:
• Section 5.6.3.1, “Viewing a List of SNMP Groups”
• Section 5.6.3.2, “Adding an SNMP Group”
• Section 5.6.3.3, “Deleting an SNMP Group”
Section 5.6.3.1
Viewing a List of SNMP Groups
To view a list of SNMP groups configured on the device, navigate to Administration > Configure SNMP >
Configure SNMP Access. The SNMP Access table appears.
Figure 129: SNMP Access Table
If SNMP groups have not been configured, add groups as needed. For more information, refer to Section 5.6.3.2,
“Adding an SNMP Group”.

RuggedCom RSG2488 Specifications

General

Brand	RuggedCom
Model	RSG2488
Category	Switch
Language	English