RuggedCom RSG2488

RUGGEDCOM RSG2488
User Guide
Chapter 5
Setup and Configuration
Managing MAC Addresses 155
Parameter Description
Class of Service assigned to received frames with the specified DSCP.
4. Click Apply.
Section 5.4
Managing MAC Addresses
The following sections describe how to configure and manage MAC addresses:
• Section 5.4.1, “Viewing a List of MAC Addresses”
• Section 5.4.2, “Configuring MAC Address Learning Options”
• Section 5.4.3, “Managing Static MAC Addresses”
• Section 5.4.4, “Purging All Dynamic MAC Addresses”
Section 5.4.1
Viewing a List of MAC Addresses
To view a list of all static and dynamically learned MAC addresses, navigate to MAC Address Tables > View MAC
Addresses. The MAC Addresses form appears.
Figure 108: Static MAC Address Table
If a MAC address is not listed, do the following:
• Configure the MAC address learning options to dynamically detect the MAC addresses of other devices on the
network. For more information, refer to Section 5.4.2, “Configuring MAC Address Learning Options”.
• Configure the address on the device as a static MAC address. For more information, refer to Section 5.4.3.2,
“Adding a Static MAC Address”.
Section 5.4.2
Configuring MAC Address Learning Options
The MAC address learning options control how and when MAC addresses are removed automatically from the
MAC address table. Individual adresses are removed when the aging timer is exceeded. Addresses can also be
removed when a link failure or topology change occurs.
To configure the MAC address learning options, do the following: