RuggedCom RSG2488 User Manual

Chapter 3
Device Management
RUGGEDCOM RSG2488
User Guide
86 Deleting an RMON Alarm
4. Click Apply.
Section 3.11.2.3
Deleting an RMON Alarm
To delete an RMON alarm, do the following:
1. Navigate to Ethernet Stats > Configure RMON Alarms. The RMON Alarms table appears.
Figure 53: RMON Alarms Table
2. Select the alarm from the table. The RMON Alarms form appears.
8
12
13
7
6
5
4
3
2
1
10
9
11
14
Figure 54: RMON Alarms Form
1. Index Box 2. Variable Box 3. Rising Thr Box 4. Falling Thr Box 5. Value Box 6. Type Options 7. Interval Box 8. Startup
Alarm List 9. Rising Event Box 10. Falling Event Box 11. Owner Box 12. Apply Button 13. Delete Button 14. Reload Button
3. Click Delete.

RuggedCom RSG2488 Specifications

General

Brand	RuggedCom
Model	RSG2488
Category	Switch
Language	English