RuggedCom RSG2488

Chapter 4
System Administration
RUGGEDCOM RSG2488
User Guide
110 Configuring User Priviliges
Section 4.6.2.2
Configuring User Priviliges
Each TACACS+ authentication request includes a priv_lvl attribute that is used to grant access to the device. By
default, the attribute uses the following ranges:
• 15 represents the admin access level
• 2-14 represents the operator access level
• 1 represents the guest access level
To configure the privilege levels for each user type, do the following:
1. Navigate to Administration > Configure Security Server > Configure TacPlus Server > Configure TACPLUS
Serv Privilege Config. The TACPLUS Serv Privilege Config form appears.
54
3
2
1
Figure 73: TACPLUS Serv Privilege Config Form
1. Server Box 2. IP Address Box 3. Auth TCP Port Box 4. Apply Button 5. Reload Button
2. Configure the following parameter(s) as required:
Parameter Description
Admin Priv Synopsis: (0 to 15)-(0 to 15)
Default: 15
Privilege level to be assigned to the user.
Oper Priv Synopsis: (0 to 15)-(0 to 15)
Default: 2-14
Privilege level to be assigned to the user.
Guest Priv Synopsis: (0 to 15)-(0 to 15)
Default: 1
Privilege level to be assigned to the user.
3. Click Apply.