RuggedCom RSG2488 User Manual

RUGGEDCOM RSG2488
User Guide
Chapter 4
System Administration
Configuring TACACS+ 109
Figure 71: TACACS Plus Server Table
2. Select either Primary or Backup from the table and press Enter. The TACACS Plus Server form appears.
7
6
5
4
3
2
1
Figure 72: TACACS Plus Server Form
1. Server Box 2. IP Address Box 3. Auth TCP Port Box 4. Auth Key Box 5. Confirm Key Box 6. Apply Button 7. Reload
Button
3. Configure the following parameter(s) as required:
Parameter Description
Server Synopsis: Any 8 characters
Default: Primary
This field tells whether this configuration is for a Primary or a Backup Server.
IP Address Synopsis: ###.###.###.### where ### ranges from 0 to 255
The Server IP Address.
Auth TCP Port Synopsis: 1 to 65535
Default: 49
The IP Port on server.
Auth Key Synopsis: 31 character ascii string
Default: mySecret
The authentication key to be shared with server.
Confirm Auth Key Synopsis: 31 character ascii string
The authentication key to be shared with server.
4. Set the privilege levels for each user type (i.e. admin, operator and guest). For more information, refer to
Section 4.6.2.2, “Configuring User Priviliges”.
5. Click Apply.

RuggedCom RSG2488 Specifications

General

Brand	RuggedCom
Model	RSG2488
Category	Switch
Language	English