RUGGEDCOM RSG2488
User Guide
Chapter 3
Device Management
Configuring IP Services 77
Figure 41: IP Gateways Table
2. Select the IP gateway from the table. The IP Gateways form appears.
Figure 42: IP Gateways Form
1. Destination Box 2. Subnet Box 3. Gateway Box 4. Apply Button 5. Delete Button 6. Reload Button
3. Click Delete.
Section 3.10
Configuring IP Services
To configure the IP services provided by the device, do the following:
1. Navigate to Administration > Configure IP Services. The IP Services form appears.
To Next Page
Loading...
Need help?
General
