RuggedCom RSG2488 User Manual

Chapter 1
Introduction
RUGGEDCOM RSG2488
User Guide
8 SNMP Management Interface Base (MIB) Support
Services Port Number Port Open Port Default Access
Authorized
Note
management
interfaces.
SNTP UDP/123 Open - Always
might acts as
server
Open No Only available
through two
management
interfaces.
SSH TCP/22 Open Open Yes Only available
through two
management
interfaces.
ICMP — Open Open No
TACACS+ TCP/49
(configurable)
Open
(configurable)
Closed Yes
RADIUS UDP/1812
to send
(configurable),
opens random
port to listen to
Open
(configurable)
Closed Yes Only available
through two
management
interfaces.
Remote Syslog UDP/514
(configurable)
Open
(configurable)
Closed No Only available
through two
management
interfaces.
TCP Modbus (RuggedServer) TCP/502 Open Open No Only available
through two
management
interfaces.
TCP Modbus (Ruggedswitch) TCP/502 Open
(configurable)
Closed No
Section 1.4
SNMP Management Interface Base (MIB) Support
ROS supports a variety of standard MIBs, proprietary RuggedCom MIBs and Agent Capabilties MIBs, all for
SNMP (Simple Network Management Protocol).
• Section 1.4.1, “Supported Standard MIBs”
• Section 1.4.2, “Supported Proprietary RuggedCom MIBs”
• Section 1.4.3, “Supported Agent Capabilities”
Section 1.4.1
Supported Standard MIBs
ROS supports the following standard MIBs:

RuggedCom RSG2488 Specifications

General

Brand	RuggedCom
Model	RSG2488
Category	Switch
Language	English