RuggedCom RSG2488 User Manual

RUGGEDCOM RSG2488
User Guide
Chapter 3
Device Management
Managing Remote Monitoring 79
3. Click Apply.
Section 3.11
Managing Remote Monitoring
Remote Monitoring (RMON) is used to collect and view historical statistics related to the performance and
operation of Ethernet ports. It can also record a log entry and/or generate and SNMP trap when the rate of
occurence of a specified event is exceeded.
The following sections describe how to configure and manage Remote Monitoring:
• Section 3.11.1, “Managing RMON History Controls”
• Section 3.11.2, “Managing RMON Alarms”
• Section 3.11.3, “Managing RMON Events”
Section 3.11.1
Managing RMON History Controls
The history controls for Remote Montoring take samples of the RMON-MIB history statistics of an Ethernet port at
regular intervals.
The following sections describe how to configure and manage RMON history controls:
• Section 3.11.1.1, “Viewing a List of RMON History Controls”
• Section 3.11.1.2, “Adding an RMON History Control”
• Section 3.11.1.3, “Deleting an RMON History Control”
Section 3.11.1.1
Viewing a List of RMON History Controls
To view a list of RMON history controls, navigate to Ethernet Stats > Configure RMON History Controls. The
RMON History Controls table appears.
Figure 44: RMON History Controls Table
If history controls have not been configured, add controls as needed. For more information, refer to
Section 3.11.1.2, “Adding an RMON History Control”.

RuggedCom RSG2488 Specifications

General

Brand	RuggedCom
Model	RSG2488
Category	Switch
Language	English