RuggedCom RSG2488

RUGGEDCOM RSG2488
User Guide
Chapter 5
Setup and Configuration
Viewing Global Statistics and Advertised System
Information 175
Parameter Description
Enables LLDP protocol. Note that LLDP is enabled on a port when LLDP is enabled
globally and along with enabling per port setting in Port LLDP Parameters menu.
Port Synopsis: 1/1 to 8/2
Default: 1/1
The port number as seen on the front plate silkscreen of the switch.
Admin Status Synopsis: { rxTx, txOnly, rxOnly, Disabled }
Default: rxTx
rxTx: the local LLDP agent can both transmit and receive LLDP frames through the port.
txOnly: the local LLDP agent can only transmit LLDP frames.
rxOnly: the local LLDP agent can only receive LLDP frames.
disabled: the local LLDP agent can neither transmit or receive LLDP frames.
Notifications Synopsis: { Disabled, Enabled }
Default: Disabled
Disabling notifications will prevent sending notifications and generating alarms for
particular port from the LLDP agent.
4. Click Apply.
Section 5.7.3
Viewing Global Statistics and Advertised System Information
To view global statistics for LLDP and the system information that is advertised to neighbors, navigate to Network
Discovery > Link Layer Discovery Protocol > View LLDP Global Remote Statistics. The LLDP Global Remote
Statistics form appears.
1
5
2
3
4
Figure 137: LLDP Global Remote Statistics Form
1. Inserts Box 2. Deletes Box 3. Drops Box 4. Ageouts Box 5. Reload Button
This form displays the following information:
Parameter Description
Inserts Synopsis: 0 to 4294967295
A number of times the entry in LLDP Neighbor Information Table was inserted.
Deletes Synopsis: 0 to 4294967295
A number of times the entry in LLDP Neighbor Information Table was deleted.