Chapter 3
Device Management
RUGGEDCOM RSG2488
User Guide
46 Viewing CPU Diagnostics
Figure 8: Product Information Form
1. MAC Address Box 2. Order Code Box 3. Classification Box 4. Serial Number Box 5. Main Version Box 6. Hardware ID Box
7. Reload Button
This screen displays the following information:
Parameter Description
MAC Address Synopsis: ##-##-##-##-##-## where ## ranges 0 to FF
Shows the unique MAC address of the device.
Order Code Synopsis: Any 57 characters
Shows the order code of the device.
Classification Synopsis: Any 15 characters
Provides system classification.
The value Controlled indicates the main firmware is a Controlled release. The value Non-
Controlled indicates the main firmware is a Non-Controlled release. The Controlled main
firmware can run on Controlled units, but it can not run on Non-Controlled units. The Non-
Controlled main firmware can run on both Controlled and Non-Controlled units.
Serial Number Synopsis: Any 31 characters
Shows the serial number of the device.
Boot Version Synopsis: Any 47 characters
Shows the version and the build date of the boot loader software.
Main Version Synopsis: Any 47 characters
Shows the version and build date of the main operating system software.
Hardware ID Synopsis: { RSG2488 }
Shows the type, part number, and revision level of the hardware.
Section 3.2
Viewing CPU Diagnostics
To view CPU diagnostic information useful for troubleshooting hardware and software performance, navigate to
Diagnostics > View CPU Diagnostics. The CPU Diagnostics form appears.