RUGGEDCOM RSG2488
User Guide
Chapter 4
System Administration
Security Alarms for Login Authentication 103
Login attempts are logged regardless of how the user accesses the device (i.e. SSH, Web, Console, Telnet or
RSH). However, when a user logs out, a message is only logged when the user is accessing the device through
SSH, Telnet or Console.
Table 10: Configurable Options
Message Name Alarm SNMP Trap Syslog
Successful Login Yes Yes Yes
Failed Login Yes Yes Yes
User Logout No No Yes
Excessive Failed Login Attempts
ROS generates this alarm and logs a message in the syslog after 10 failed login attempts by a user.
Table 11: Configurable Options
Message Name Alarm SNMP Trap Syslog
Excessive Failed Login Attempts Yes Yes Yes
RADIUS Server Unreachable
ROS generates this alarm and logs a message in the syslog when the primary RADIUS server is unreachable.
Table 12: Configurable Options
Message Name Alarm SNMP Trap Syslog
Primary RADIUS Server
Unreachable
Yes Yes Yes
TACACS+ Server Unreachable
ROS generates this alarm and logs a message in the syslog when the primary TACACS+ server is unreachable.
Table 13: Configurable Options
Message Name Alarm SNMP Trap Syslog
Primary TACACS Server
Unreachable
Yes Yes Yes
TACACS+ Response Invalid
ROS generate this alarm and logs a message in the syslog when the response from the TACACS+ server is
received with an invalid CRC.
Table 14: Configurable Options
Message Name Alarm SNMP Trap Syslog
TACACS Response Invalid Yes Yes Yes
SNMP Authentication Failure
ROS generates this alarm, sends an authentication failure trap, and logs a message in the syslog when an SNMP
manager with incorrect credentials communicates with the SNMP agent in ROS.
To Next Page
Loading...
