SatLab SLT2 - Remote Height Measurement

Total Station Manual
-
100
-
[DTM-GRD]: To calculate the
ground defined area by TIN
method.
[BL-Area]: To calculate the ground
defined by the break line by TIN
method.
[DTM-V-I]: To calculated volume
by TIN method
[EXPAND-R]:expansion rate, to
give a ratio of the volume A to
volume B, Volume A is the actual
volume while volume B is the
volume after the earthwork.
[DTM-V-II]: To calculate the
volume of earth work
[DENSITY]: The Density of the
object.
[WEIGHT]: The total weight of the
object(ton)
※In all of the above operation, press [ESC] to return to the previous screen.
10. Remote Height
Remote Height is an application used to measure the height to the target (such
as electric cable, bridge, etc.) where can’t be set prism.