SatLab SLT2 - Firmware Upgrade Procedure

Total Station Manual
-
185
-
2. System information
2.1 View System Information
In Tools Menu, choose “2 Info.” to enter “Info”.
In this window, user can view detail information about the instrument, includes
instrument type and SN, firmware version and date time.
System Information
2.2 Set System Date
In system information window, press [F1] (Date) to enter “Date Setting” window.
To set the date, input the new date string that in the format of tips, then press
[F4] (OK) to save the new date.
For example: To set date “2015-11-11”, input string “20151111”, then press [F4]
(OK) to save.
Date Setting
2.3 Set System Time
In system information window, press [F2] (Time) to enter “Time Setting”
window.
To set the time, input the new time string that in the format of tips, then press
[F4] (OK) to save the new time.