SatLab SLT2 - Edit Fix Pt

Total Station Manual
-
158
-
2.3 Edit Fix Pt.
The function can edit the fixpoints in the memory.
Steps
Key
Display
○
1 In the interface of View
FixPoint, you can find the data of
need to be edited by pressing the
direction key of left or right or in
the function of finding. If you want
to change the job which the point
needs to be edited, you can press
[Job] to select the target job.
○
2
Press [F3] (Edit) to enter the
interface of Edit Fixpoint. The
screen displays the point data.
Input the new point’s name and
coordinate and press [ENT] to
move the cursor to the next row.
When the data doesn’t need to be
edited, you can press [ENT]
directly.
○
3 Press [F4] (OK) to save the
edited data after finishing
inputting. Program gives a prompt
whether to overwrite or not and
press [F4] (OK) to over right and
save.
[F4]