SatLab SLT2 - Tie Distance Calculations; Polygonal Tie Distance Method

Total Station Manual
-
92
-
8. Tie Distance
Tie Distance is an application used to compute slope distance, horizontal
distance, height difference and azimuth of two target points which are either
measured, selected from the memory, or input using the keypad.
The user can choose between two different methods:
• Polygonal: P1-P2, P2-P3, P3-P4
• Radial: P1-P2, P1-P3, P1-P4
Start Tie Distance application through “Main Menu”→”Program”→”Tie Distance”.
8.1 Polygonal
While Polygonal tie distance measuring continuous points, the new tie distance’s first
point will use the previous one tie distance’s second point(P1-P2、P2-P3、P3-P4……).
Steps
Key
Display
○
1
Press [F4] in the Program
Menu to go to Tie Distance
application.
[F4]