Total Station Manual
It means that focus or eyepiece diopter is not adjusted when there is a parallax
with eye moving up and down, thus focus carefully and adjust eyepiece to reduce
parallax.
Total station keyboard includes alpha/digit keys. User can input letters and
numbers directly.
Each digit key defines 3 letters and 1 number. Depends on the properties of input
box, input process varies.
Number input box:
In number input box, user can only input numbers, include “1-9”,“.”, “-+”.
Number will appear in box when user presses the key.
Text input box:
In text input box, user can input numbers and letters. Repeat pressing same key
to get proper letter, such as A->B->C->7.
When right-bottom of screen display icon , user can input number/letter;
when display icon , user can only input number. User can press soft-key [F4] to
switch input mode between Number and Text when input box been active.
Letters that total station can input includes “A-Z/$%_@&*?!+-.”. When wildcard
queries, you need to use the "*" character and press the ± key twice in the
character input mode of the total station,.
Arrow key ←,→ move inputting cursor.
Pressing ENT enters editing; pressing ENT confirms input after editing.
When editing distance, angle, temperature and pressure values that contain unit
format, input box’s text will convert into text without unit format. Such as angle
29 ° 32 ′ 56 ″ transforms into 29.3256; Distance115.321m transforms into
115.321. When finish editing, the text will automatic convert back.
Each digit key defines 3 letters and 1 number. In text input mode, each time
pressing the key, one character appears at cursor position. Number appears when
pressing 4 times.
To Next Page
Loading...