SatLab SLT2 - Starting Measurement Applications

Total Station Manual
-
67
-
○
3
Aim backsight point and then
press [ENT].
Press [F1](ALL) or press [F2](DIST)
and [F3](REC) to start measuring
and finish setting orientation.
User can also press [F3](REC) to
finish setting orientation without
measurement.
Press the [PAGE] key to switch
the display of measured values
screen and backsight inspection
values screen.
[EDM]: Go to set EDM settings.
[ENT]
[F1]
or
[F2]、[F3]
○
4
Back to Pre-Settings screen.
The setting items that have been
made are marked with *.
4. Starting the Applications
The preset applications covers a wide range of measurement tasks. That makes
the daily field measurement easier and faster. The all applications can be selected to
use are as follows:
 Surveying

Stakeout