SatLab SLT2 - Select the Fix Point in the Memory [List]

Total Station Manual
-
61
-
screen. Continue to set the
coordinates of station.
○
5
Back to Pre-Settings screen.
The setting items that have been
made are marked with *.
※
1
: The details of [Find Pt.] can be found in the chapter “Find Point”. You can also
input the wildcard "*" to search all the points.
2.2 Select the Fix Point in the Memory [List]
User can select the fix point in the memory's jobs to set station without
inputting the point name.
Steps
Key
Display
○
2
Press [F2](List) in the [Set
STA] screen.
[F2]
○
3
Show the point list all the fix
points and measured points of
the current job.