SatLab SLT2 - Line-Line Intersection

Total Station Manual
-
119
-
11.6 Line-Line Intersection
Use the line-line (LNLN) sub application to calculate the intersection point of to
lines. A line is defined by two points.
Figure 11.6 LNLN Diagram
Known
P1 First known point
P2 Second known point
P3 Third known point
P4 Fourth known point
L1 Line from P1 to P2
L2 Line from P3 to P4
Unknown
P5 COGO point
Steps
key
Display
○
1 In the [Intersection] screen,
press [F4] or [4] to enter the
LNLN sub application.
[F4]
or
[4]