SatLab SLT2 - Set Point

Total Station Manual
-
122
-
[F1]
or
[1]
○
2
Set the start point, end
point and offset point one by
one.
※ There are four ways to get
the known point for DistOff
calculation. Please refer to
the step
○
2
in the “COGO
Traverse”.
Set the
known
points
○
3 When all of the points are
set correctly, press [F2](Result)
to calculate the intersection
point and show the results.
Input the name of result point
in the [DistOff Result] and
press [F4](REC) to save the
point.
[F2]
+
[F4]
※ In all of the above operation, press [ESC] to return to the previous menu.
※ The result point is plane data.
11.8 Set Point
Use the Set Point (Set Pt) sub application to calculate the coordinate of a new
point in relation to a line from known longitudinal and offset distance.