SatLab SLT2 - Set Station and Instrument Height

Total Station Manual
-
37
-
3.2 Set Station and instrument height
After set the coordinate of station (the site of instrument) relatives to the origin,
the instrument can calculate the coordinate of the location to your position (the site
of prism).
You can set station and the instrument height conveniently in the Q-Survey.
Steps
Key
Display
○
1 Aim at the target which used
to orient. Press [F4] twice to
enter third pages soft key.
[F4]
+
[F4]
+
[F2]
○
2
Press [F1] (Station) to enter
the interface of Enter STA.
Enter the name of station, the
instrument height and
coordinates.
After entering each item, move
the cursor to the next edit text.
[F1]
○
3 After finished entering,
press [F4] (OK) to save the data of
station and back to the function
of Q-Survey.
[F4]