SatLab SLT2 - Distance-Distance Intersection

Total Station Manual
-
115
-
○
5 Move the focus to “HD2”
by using [ ▼ ] and input the
radius after set second point.
[▼]
+
Input
radius
○
6
When all of the data are
entered correctly, press [F2]
(Result) to calculate the
intersection point and show
the results.
Input the name of result point
in the [BRG-DST Result] and
press [F4](REC) to save the
point.
Press [F1] to switch to view
results.
[F2]
※ In all of the above operation, press [ESC] to return to the previous menu.
※ The result point is plane data.
11.5 Distance-Distance Intersection
Use the distance-distance (DST-DST) sub application to calculate the intersection
point of two circles. The circles are defined by the known point as the center point
and the distance from the known point to the COGO point as the radius. The result
may be have 1 intersection point, may be have 2 points, or may be have no one.