SatLab SLT2 - Page 115

Total Station Manual
-
114
-
Steps
key
Display
○
1 In the [Intersection] screen,
press [F2] or [2] to enter the
BRG-DST subapplication.
[F2]
or
[2]
○
2 Input the name of first
point in “PT1” field.
※ There are four ways to get
the known point for
BRG-DST calculation. Please
refer to the step
○
2 in the
“COGO Traverse”.
Input
name of
first point
○
3 Move the focus to “AZ1” by
using [ ▼ ] and input the
bearing after set first point.
[▼]
+
Input
bearing
○
4
Move the focus to “PT2” by
using [ ▼ ] to setting second
point.
[▼]
+
Set second
point