SatLab SLT2 - Wildcard Point Search Method

Total Station Manual
-
22
-
○
5
Entering searching point
number. If using input point,
press key F2 (Zero) or F3
(Coord.)※
1
[ENT]
○
6 Press key F4 to search the
point in the selected job.
[F4]
※
1
[F2](Zero): Set N, E, Z to 0.
[F3](Coord.): Input point manually.
[OK] Commit selected point.
8.2 Wildcard search
The wildcard search is indicated by a “*”. The asterisk is a place holder for any
following sequence of characters. Wildcards should be used if the point number is
not fully known, or to search for a batch of points.
Examples:
* All points are found.
A All points with exactly the point number “A” are found.
A* All points containing “A” are found, for example, A1, A2, 1A.
Steps: (For example “*”)
Steps
Key
Display
○
1
Choosing ‘Survey’ in
application menu, then choose
function ‘Set STA’. Entering “*”,
pressing ENT to finish input,
then pressing F1 to search.
[F1]