SatLab SLT2 - Recording Point Codes

Total Station Manual
-
38
-
3.3 Measurement
After all settings have been finished, you can start to measure. There are 3
pages to display the result of measurement, including all measurement data and you
can press [PAGE] to view.
Steps
Key
Display
○
1
Input the name of point and
instrument height. Move the
cursor to the next edit text after
entering each item. You can enter
Code when necessary.
[ENT]
+
[ENT]
○
2
Aim at the center of prism,
press [F1](ALL) or
[F2](DIST)+[F3](REC) to start to
measure and record the
measurement data. The
measurement data including angle
data, distance data and coordinate
data. You can press [PAGE] to view.
[F1]
or
[F2]
+
[F3]
○
3
After finishing measuring a
point, program makes the number
of point add 1 automatically, aim
at the center of prism and repeat
the above steps to start next point
measurement.