Total Station Manual
Resection measurement is an application used to determine the coordinate of
the instrument station by measuring multiple known points. A minimum of 2 and a
maximum of 5 known points can be used to determine the station. It should be used
at least 2 known points by distance measurement or at least 3 known points by angle
measurement.
○
1 Select “Program” from the
[Main Menu] window, press [F3]
or number key [3] to enter the
Resection application.
○
2 Press [F1] in the [Resection]
window to set the job.
○
3 In [Set Job] window, press
[F1] (List) to select a job in
memory or press [F2] (New) to
new a job. Then press [F4] (OK)
to next step.
To Next Page
Loading...