SatLab SLT2 - Page 89

Total Station Manual
-
88
-
○
7 Move the prism along the
arrow direction to make the
value of △ equal 0m.
In the process of staking out, if
using the Repeat Measurement
or Tracking Measurement, the
calculation of the differences
between measurement point and
stakeout point can be displayed
in real time and convenient.
○
8 Now it finishes staking out a
point. Repeat the previous
steps
○
2
～
○
7
to stake out next
point.
※
1
: The inputs of polar coordinate data won’t be saved to job.