SatLab SLT2 - Polar

Total Station Manual
-
86
-
6.5 Polar
Press [Polar], then input the polar stakeout elements: Azimuth and Horizontal
distance. Start to stake out after finishing inputs of Azimuth and Horizontal distance.
Steps
Key
Display
○
1 Press [F4]( ↓ ) twice to view
the second page soft keys.
[F4]
○
2 Press [F1](Polar) to show the
dialog as shown in figure.
[F1]
○
3 Input the stakeout point’s
name, azimuth and horizontal
distance. Press [ENT] to confirm
every input and move the cursor
to next input item. Press [F4](OK)
to go to Polar Stakeout screen
after finishing all inputs. ※
1
Input point
name,
azimuth
and
horizontal
distance
+
[ENT]
+
[F4]