Total Station Manual
using the Repeat Measurement
or Tracking Measurement, the
calculation of the differences
between measured point and
stakeout point can be displayed
in real time and convenient.
○
6 It means the current prism
position is effective stakeout
point while both the △ Y/E and
△X/N are 0.
△Z/H: Display as dig or fill data.
△ Z/H is positive: The value
expresses the depth of needed to
dig.
△ Z/H is negative: The value
expresses the height of needed
to fill.
○
8
Now it finishes staking out a
point. Repeat the previous steps
to stake out next point.
To Next Page
Loading...