SatLab SLT2 - Data Export Procedures

Total Station Manual
-
169
-
○
6
Import code can only use
RS232C method. This is same
to Step
○
4
.
[F4]
2. Data Export
User can use this function to transfer internal data (fixed points, measurement
data, and code) from instrument to computer or u disk.
Export: Fixed points, measure data, and code.
Method: RS232C, U Disk.
Format: CASS, GTS-7 (For fixed point, U Disk)
HTF format, GSI format, GTS-7, CSV, CASS(For measure data, U Disk)
Job: Job needs to export.
Steps
Key
Display
○
1
In main menu, choose “4
Transfer” to enter “Data
Transfer” menu.
Pressing [F2] or [2] enters
“Export Data”.。
[4]
[F2]
or
[2]