SatLab SLT2 - Page 171

Total Station Manual
-
170
-
○
2
In “Export Data” menu,
press [F1] or [1] entering
“Export job data” function.
[F1]
or
[1]
○
3
Press [F1] to select job
that you need to export,
then press [F4].
[F1]
[F4]
○
4
Press [
◄
], [
►
] key to
select data type that you
want to export.
[
◄
]
[
►
]
○
5
Two methods to use:
RS232C, U Disk.
Press [◄], [►] key to select
transfer method (mode).
If choosing RS232C,
software on the computer
should be ready, and then
press [F4] to start export.
If choosing U Disk, the U
Disk should have been
plugged in, then press [F4]
to start export.
User can also use key [
◄
],
[►] to select the format of
[
◄
]
[
►
]
[F4]