SatLab SLT2 - New a Job

Total Station Manual
-
152
-
○
2
The interface displays the job
list in the current storage.
○
3
Using the direction keys to
select a job, when the needed job
is selected, press the key of [F4],
the program gives a prompt of
“Job Set” and open the job as the
current job.
[↑]、
[↓]
+
[F4]
1.2 New a Job
Steps
Key
Display
○
1 In the menu of Job Manager,
press [F1] to enter the menu of
job function.
[F1]
○
2
The interface displays the job
list in the current storage. The jobs
in the SD card have the mark of
“[SD]” and the current job have
the mark of “*”. Press [F2] (New)
to enter the function of new a job.