SatLab SLT2 - Deleting Input Characters; Point Search Functionality; Direct Point Search Method

Total Station Manual
-
18
-
Example: input 123ABV2
Steps
Key
Display
○
1 Pressing key to start
inputting. Right-bottom screen
displaying icon means in
number input mode.
○
2 Press key 1, key 2, key 3.
Then press key F4, active text
input mode. Icon should
appear in right bottom screen.
[1],[2],[3],[F4]
○
3 Press key 7, display letter ‘A’,
wait about half second, press
key 7 twice, display letter ‘B’,
then press key 2, display letter
‘V’, wait about half a second,
press key 2 four times, display
number ‘2’. Then finished text
‘123ABV2’ input.
[A],[B],[V],[2]
○
4 Press key ENT to finish
editing, cursor will move down
to next input box.
[ENT]
7.2 Delete characters
Delete or clear input characters.