SatLab SLT2 - Data Viewing and Management

Total Station Manual
-
71
-
○
4
Press [F1](ALL) or press
[F2](DIST) and [F3](REC) to start
measuring and record the
measured data.
[F1]
or
[F2]+[F3]
○
5 Finish measuring, application
turn off the function of
measuring individual point and
then continue to display the
consecutive point name.
5.2 Data
[Data]:
Look over the measured data which are saved in current job.
Steps
Key
Display
○
1
Press [F4](↓) twice to display
the last page of soft keys.
[F4]
○
2
Press [F3](Data) to start view
measured point function.
[F3]