Total Station Manual
○
4 The screen starts to display the
information of measurement data
from the first piece of data in the
job. Press the direction key of left
or right can view the measurement
point data which match the view
condition one by one.
Pressing [PAGE] can view a piece of
measurement point data’ other
pages.
Press [Search] to back to the
interface of View Meas PT.
3.2 Delete measurement data
The not good and the repeating measurement data can be deleted.
The station data and the last piece of data in the data items can not be deleted.
○
1
After finding the measurement
point data which need to be
deleted, press [F1] to delete.
○
2
The window of program
prompts whether to delete or not.
Press [F4] to make sure to delete
and press [F1] to cancel the
operation.
To Next Page
Loading...