SatLab SLT2 - Data Transfer Functions; Data Import Procedures

Total Station Manual
-
167
-
7. Data Transfer
This function is doing data transmission between instrument and computer, or
between instrument and removable device. This function includes 2 parts, import
and export.
The data transmission between instrument and removable device must have U
Disk plugged in.
Note: The machine supports up to 8G U disk read and write, when running the
program, don’t insert or pull out the U disk. If you pull out the U disk when the
instrument checking it, the subsequent operations may cause error!
1. Data Import
User can use this function to transfer fixed points data or code data to
instrument from computer via RS232 cable. User can also transfer fixed points data
to instrument via U Disk.
Import: Fixed Points, Code
Method: RS232, U Disk
Format: CASS, GTS-7, CSV, GSI(For U Disk)
Source: Data file in U Disk (For U Disk)
Job: Target job that data been transfer to.
Steps
Key
Display
○
1
In main menu, chooses “4
Transfer” to enter “Data
Transfer” menu.
Pressing [F1] or [1] enters
“Import Data”.
[4]
[F1]
or
[1]