SatLab SLT2 - Point Search; Direct Search

Total Station Manual
-
19
-
Steps
Key
Display
○
1 Press key ← to move
cursor to right side of the
character that to be deleted.
←
○
2 Press key F1(Delete).
[F1]
○
3 Press key ENT to confirm
input. Press Key ESC to
undo changes.
[ENT] /
[ESC]
8. Point Search
Point search is a function used by applications to find measured or fixed points
in the jobs.。
Point search is limited to a particular job.
If several points meet the search criteria, then the results are ordered according
to the date.
8.1 Direct search
By entering an actual point number (for example ‘A1’), and pressing key SEARCH,
all points within the selected job and with the corresponding point number are
found.
Here is an example for searching fix point in function ‘Set STA’.