SatLab SLT2 - Result.setting out; Transfer

Total Station Manual
-
130
-
12.3 Result.Setting out
After the staking out, the result can be checked.
Steps
Key
Display
○
1
Click F3 Result.Setting out for
the result checking.
[F3]
○
2
All the result with
corresponding result can be
viewed here.
[F1]
12.4 Transfer
User can import the predefined road data for staking out while he can also
export the result. Either by serial com port or by USB disk. By clicking F4 in the home
button then there will come for the import and export.
Steps
Key
Display
○
1
Pressing key [F4] enter Data
transfer function
[F4]