SatLab SLT2 - Individual Point Measurement

Total Station Manual
-
70
-
5.1 Individual Point
[IndivPt]:
In the data acquisition, point can be recorded individually. Press this key to
switch the screens of Individual Point Measurement and Consecutive Point
Measurement.
Steps
Key
Display
○
1 Press [F4](↓) twice to display
the last page of soft keys.
[F4]
○
2
Press [F2](IndivPt) to start
measuring individual point
function.
[F2]
○
3 Input the individual point’s
name and prism height and press
[ENT] to move the cursor to next
input item.. If needed, input the
code.
Input point
name,
prism
height and
code
+
[ENT]