SatLab SLT2 - Table of Contents

Total Station Manual
-
6
-
CONTENTS
1. Name and function of each part
..............................................................................
10
1. Name
................................................................................................................
10
2. Keys Functions and information display
...........................................................
12
2. Preparation before measurement
............................................................................
13
1. Unpack and store instrument
...........................................................................
13
2. Setting up the instrument
................................................................................
13
3. About the battery
.............................................................................................
15
4. Reflecting prism
................................................................................................
16
5. Loading or unloading the base
.........................................................................
16
6. Adjust telescope objective and aiming target
..................................................
16
7. Input Mode
.......................................................................................................
17
7.1 Input characters
......................................................................................
17
7.2 Delete characters
....................................................................................
18
8. Point Search
......................................................................................................
19
8.1 Direct search
...........................................................................................
19
8.2 Wildcard search
......................................................................................
22
3. Q-Survey
...................................................................................................................
24
1. Notes in the distance measurement
................................................................
24
2. EDM Setting
......................................................................................................
26
2.1 Set the mode of EDM
.............................................................................
26
2.2 Atmosphere setting
................................................................................
28
2.3 Grid factor setting
...................................................................................
31
2.4 EDM signal
..............................................................................................
32
3. Start measurement
...........................................................................................
34
3.1 Set HA
.....................................................................................................
34
3.2 Set Station and instrument height
.........................................................
37
3.3 Measurement
.........................................................................................
38
3.4 Code
........................................................................................................
39
4. Functions
..................................................................................................................
41
1. Level
..................................................................................................................
41
2. Offset
................................................................................................................
42
2.1 Distance Offset
.......................................................................................
42
2.2 Cylinder Offset
........................................................................................
43
2.3 Angel Offset
............................................................................................
45