SatLab SLT2 - Page 169

Total Station Manual
-
168
-
○
2 In “Import Data” menu,
press [F1] or [1] entering
“Import Fix Pt” window.
[F1]
or
[1]
○
3
Press [F1](Job) to select the
job you want transfer data into,
then press [F4] (OK).
[F1]
[F4]
○
4
If choosing RS232C
method, using cable to connect
instrument and computer first,
on computer side, press button
[Send] in transfer software, and
then press [F4] (Import) on the
instrument.
[F4]
○
5
If choosing U Disk method,
plugging u disk in the
instrument usb port first, then:
1. Press [◄], [►] key to select
“U Disk”;
2. Press [F2] to explore files in
u disk and select the data file.
3. Press [▼], [▲] moving to
the format option, then press
[◄], [►] key to select the data
file’s format.
4. Press [F4] (Import) to start
import.