SatLab SLT2 - Offset and Extension Calculations

Total Station Manual
-
120
-
○
2 Set the known point one by
one.
※ There are four ways to get
the known point for LNLN
calculation. Please refer to
the step
○
2 in the “COGO
Traverse”.
Set the
known
points
○
3
When all of the points are
set correctly, press [F2](Result)
to calculate the intersection
point and show the results.
Input the name of result point
in the [LNLN Result] and press
[F4](REC) to save the point.
[F2]
※ In all of the above operation, press [ESC] to return to the previous menu.
※ The result point is plane data.